Technical Note: 20011004028

Increment the Batch Number

(Maitre'D 2002-2005)

Electronic Funds Transfer

• Stop the Maitre'D Server under the Server Control / File menu.
• Click on your Start button from your desktop. You will then need to select Hyper Terminal. Depending on the way your system is configured, you might access it through different menus. Basically you will find it under Start / Programs / Accessories / Communications / Hyper Terminal.

Windows will display a folder such as:

Select the application Hyperterm.exe and you will be guided you through a new connection. You will see a window like this:

Enter a name for that new connection: EFT testing, and select an icon. Then click on OK.
System will then display this window. Select the COM where your modem is plugged using the drop-down in the Connect Using field, and click OK.

At this point, a configuration window will display. Enter the following information:

• Bits per second: 2400
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Hardware

Once completed, this window should be like this:

Click on OK to accept those settings. You will then access your dialog window:

Type AT and press ENTER. Answer will be 0, OK or ERROR. If there is no answer, check modem for connection, power; If answer is ERROR, type the command ATandUF1 0 and press ENTER to bring it out of financial mode. Note that there is a space between 1 and 0 at the end of the command. Then retry the AT command.
To do the actual batch number change, you need to type in ATandUB7
followed by a space, followed by the batch number, followed by a space and a star 4 times,
so it would end up, for batch number 1234, to look like this;
ATandUB7 1234 * * * *
After that, you can exit from the HyperTerminal.
Start Maitre'D Back-Office and go under Server Control / File menu to Start the Maitre'D server.
Open Batch
Electronic Funds Transfer / File / Open Batch.