Technical Note: 20011004065

Tekvision Wedge

(Maitre'D 2002-2003)
This unit is a serial Elographic touch screen using COM4 for touch.
To make it work properly under Maitre'D, you will need to make the following changes:
  1. From Tekvision, you receive an installation diskette for the touch including the EloDev.exe driver release 1.7. This driver support the com4 as touch serial port. You need to copy that EloDev.exe file over the C:\Posera\MaitreD\Prg\EloDev.tx file.
  2. The default network card address and IRQ for this workstation is add. 300 int. 12. You need to edit the C:\Posera\MaitreD\Prg\posnet\Protocol.ini file with these parameters.
  3. You need to modify the ELODEV configuration key and value in the C:\Posera\MaitreD\Prg\AutoTekK.txX file. The line needs to be: lh ELODEV 140,4,9600,11 -c63,1853,1953,140,1,15
    4. After you made these changes, create a workstation disk as Tekvision workstation type.
NOTE:After any update of the Maitre'D software, you will need to redo steps 1 to 3.