Technical Note: 20060721032

Ingenico 3070 PIN Pad Setup for NCR (Canada)

(Maitre'D 2005, from Service Pack 4 and later versions of 2005)

This device replaces the obsolete Phantom and POSpad PIN Pad that were used with the NCR setup.

  1. Setup your device in P.O.S. Control / Workstation / Options / Devices

  2. Stop the Maitre'D workstation application

  3. Connect the Ingenico 3070 PIN Pad to the COM port setup in P.O.S. Control

  4. Plug the PIN Pad into the electrical outlet

  5. PIN Pad will start to load (you will see many authenticate screens)

  6. At the screen: INITIALIZING PINPAD

    1. Press on the "ALPHA" button

    2. With the "ALPHA" button, choose "MONPSPD U-0118" and press on "OK"

    3. With the "ALPHA" button, choose your language and press on "OK"

    4. With the "ALPHA" button, choose the 5.x version and press "OK"

    5. With the "ALPHA" button, choose "latest version" and press "OK"

    6. With the "ALPHA" button, (for NO) at the "check for error" screen

  7. When the PIN Pad displays INITIALIZATION, start the Maitre'D workstation application

  8. When the PIN Pad displays: WELCOME/BONJOUR B=96, on the workstation,
    in the Manager Function screen, touch the Initialize POSpad button.