Technical Note: 20060322016

Nova EFT trough NETePay (USA)

(Maitre'D 2003, from Service Pack 11 and later versions of 2003)
(Maitre'D 2005, from Service Pack 3 and later versions of Maitre'D)

You can use the Nova Electronic Funds Transfer under the DSIClientX protocol.

Type:

Terminal Based
or
Host Based

Required software

Note: If you have a firewall the Nova terminal must installed in front of it for the credit transactions to work.

From Posera:

From Datacap:

Datacap contact: Stephanie Heim 215-997-8989

Requirements:

NETePay Software for Nova Server

Datacap will provide you with software that reaches the Nova provider (Server software that accepts multi-threaded payment authorization requests from DSIClientX and forwards them to the bankcard processors via Internet or Frame Relay, resulting in 2-second responses. This Includes transaction storage / reporting and batch management functions. This can be operated at the store or enterprise level. Multi-merchant gateway versions are also available, which requires an always-on IP connection.

Installing the DSIClientX control

The DSIClientX control is not included in Maitre'D installation. This application is an XML ActiveX client controlled software that sends encrypted payment authorization requests via a local area network or Internet to Datacap's dial and Internet payment servers.

 

The DSIClientX control must be installed on your Maitre'D Back-Office PC and on every workstations that will process Debit Cards with a PIN Pad. The control is available as a free 5mb self installing executable from http://www.datacapepay.com/
It may be installed before or after Maitre'D and takes just a minute to install (requires a reboot).

DO NOT TRY TO SKIP THIS STEP !!!!!

PIN Pad for Debit Card Transactions

With this software you have the choice between three Verifone PIN Pads.

Verifone 1000:

This PIN Pad comes with a small box called a Peripherical Device Controller. This device is plugged to a serial com port on your workstation and also plugged into the power supply outlet.

Verifone 2000:

This PIN Pad includes the Peripherical Device Controller and is directly plugged to a serial com port on your workstation.

Verifone SC 5000:

This PIN Pad includes the Peripherical Device Controller and is directly plugged to a serial com port on your workstation.
Note: The PIN Pad must be set by Datacap with the 2000 emulation. Also, in P.O.S. Control / Workstation / Device / PIN Pad, the Driver filed must be set to Verifone PIN Pad 2000.

Available options at the Back-Office PC

Close Batch Setting:

In the Maitre'D Back-Office program go to EFT / View / Option. Under the operation page, select the External close batch option. Enable this option to use an external application to close the EFT batch. For some host based protocol, the integrated close batch feature can not be used. These batches must be closed by using an external application provided by the service provider.

Close batch:

In the Maitre'D Back-Office program go to EFT / File / Close Batch. This will open the NETePay administrator that will give you the option to close the Batch. In essence Maitre'D Back-Office calls the NETePay administrator program. It is in NETePay where the close batch will be finalized.

Report:

Every report is available on the NETePay administrator program under View / Batch report View.

Refund:

In the Maitre'D Back-Office program go to EFT / Transaction / Return Transaction and enter the proper information with the credit card number.
*WARNING* Do not press Clear / Erase Batch until the batch was closed. Doing so will result in the loss of the entire batch with no possibility of retrieval. Instead close the batch first then you can clear to flush out any un-finalized transactions.

Setting the Employees

P.O.S. Control / Employees / Configuration / Invoice / Payment

EFT reprint:

Enable this option to allow the employee to print duplicate EFT vouchers before the transaction is finalised.

P.O.S. Control / Employees / Configuration / Media

Enable all Credit Cards and the Debit Card payment types.

Available options at the workstation

Regular Transaction:

Pre-authorizations will allow to add tips and then finalize the transactions.

Modify the Media Type:

In case of a mistake you use the last 4 digits of the check, and then touch the close button. You will see your CC transaction in red, touch the transaction, you will see an option to Void Current Credit Authorization Status or Modify Check Amounts, and then you could modify your media to cash or any other form of payment.

Refund:

If you want to do a refund a transaction you can do a table 0 void, and then select the media type. Maitre'D gives you the option to do a refund, and then it will print a receipt to give to the customer.
Note: Debit refunds are not supported.

How to process Debit Cards

Ring up a transaction and touch the Close button. When you reach the Payment screen, touch the Debit Card button, and enter the full amount, or simply touch Enter, and follow the instructions on the PIN Pad for the rest of the transaction. Once the transaction is accepted, the workstation will print an approval receipt.